Stacko™ Assembly Instructions

Stacko™ setup is quick & simple. 


Inspect all components for damage and serviceability.


Before using these products you must perform your own risk assessment.


Position the base on a solid, level surface suitable for the expected load being supported. Place 3 Stacko™ Blocks in the Base Pad grooves to complete the first layer.


Begin the second layer by placing another 3 blocks in the opposite direction of the first layer.


Simply repeat adding layers in alternating directions until the desired height is reached. Up to a maximum of 60”. Before building the top layer see the next step.


Depending on the stack configuration, the top layer of blocks may need to be turned on their side to allow for a flat top surface.